• Green Environment Create Healthy Global

About Us

Posted by Future Green Enviro On 8:31 PM

Future Green Enviro was established in early 2010. The company has been extensively doing lots of experiment for the past 2 years on Hydrogen Booster and continuing its effort seriously.

Future Green Enviro has one common objective on environment after much talk on global warming issues around the world. Our company’s main objective is to help reduce pollution in order to have greener and cleaner surroundings for now and the future.

Since the global warming issues has been the talk of every country, Future Green Enviro, has extensively doing experiment on products for vehicles and machineries to suit the demand for greener environment. Not only the products helps reduces pollutions for better environment but also reduces cost in fuel and maintenance.

Presently, Future Green Enviro, has been targeting Hydrogen Booster for automobile market. This is mainly due to the increase on public transport, such as bus and trucks.
Future Green Enviro, is also targeting smaller industry sector such as diesel generators.

Some of the Hydrogen Booster are being used in trucks, excavators and generators as shown in our company’s “Photo Gallery”.

To have a greener environment and less polluted surroundings, we should all take “small steps” and initiative beginning from every individual.

Lets all and Future Green Enviro, work together for a greener environment and make the world a cleaner place to live in.

Presently, some of our products are being shipped to Australia, India and Europe.

Please fill free to contact us without any obligations at our “Contact Us” anytime.

Water Engine - Untold Misteries

Posted by Future Green Enviro On 1:52 PM



Engine that works with water. Free energy for all! Stop pollution.

This is the first video i watch before i got an idea to discover about hydrogen booster. you may check this out. what is the untold misteries???

Run Your Car On Water - As seen on TV

Posted by Future Green Enviro On 7:00 PM



Run Your Car On Water! Sounds ridiculous but its true!!

Will Hydrogen Booster Damage My Car?

Posted by Future Green Enviro On 4:08 PM

We get this question all the time. The answer is simple: Your car is being damaged right now by unburned fuel! Our devices help not only eliminate carbon deposits caused by unburned gasoline - but will ACTIVELY clean out your engine every time you drive. Over the first few weeks you will notice that the engine becomes smoother and smoother. Then it will level off at a new level - at which the engine continues to steam-clean itself every day!
Every HHO booster device we've installed makes the engine more quiet & calm. It stops knocking or "pinging". The HHO gas changes the combustion cycle and makes it more even or "round". This happens immediately upon installation, and from that moment on your engine works in a new mode. The effect is not only less noise, it's also less vibration, resulting in reduced strain on the transmission leading to smoother gear shifts, cleaner pistons and valves, and generally better engine operation.
All of the above happens without losing engine power. In fact, any Drive on Water device widens the torque range and makes the vehicle accelerate faster. After acceleration, you don't have to press the gas pedal as much to keep riding.
Easy undo: Our technology does not change your vehicle's engine or computer, so if you ever decide that you want to remove the device, simply unhook it, and in about one minute or less your car is just as it was, only cleaner!

How safe is it?

Posted by Future Green Enviro On 4:02 PM

The process is very safe because the combustible gas is extracted on demand and burned steadily from the water, unlike larger volumes of pure hydrogen which are highly flammable. 

Our generator produces hydrogen as your car needs it, rather than using storage tanks. Thousands of cars have been safely converted without any issues or incidents.

Best of all, this conversion process is completely reversible so it will not void your auto manufacturers warranty. It simply acts as an add-on to significantly increase your fuel efficiency.

Benefied of Hydrogenator

Posted by Future Green Enviro On 3:37 PM

More Horsepower  The hydrogen cleans up the carbon build-up in your engine, allowing it to run much smoother and more efficiently. Faster burn in the cylinder power stroke can provide a significant increase in the power output of your ICE.


Less Green-House Gases Supplemental hydrogen and oxygen reduces the amount of harmful gases that your vehicle releases into the atmosphere (making it more environmentally friendly).


Increased Gas Mileage  We guarantee a significant reduction in your fuel consumption (from real-world tests and user reports we have received reported mileage increases of 30% to 45%). 

Clean-burning fuels. The following are clean-burning fuels.

  1. Natural gas.
  2. Liquefied natural gas.
  3. Liquefied petroleum gas.
  4. Hydrogen.
  5. Electricity.
  6. Any other fuel that is at least 85% alcohol (any kind) or ether.
Deduction for Clean-Fuel Vehicle Property
The deduction for this property may be claimed regardless of whether or not the property is used in a trade or business.
Clean-fuel vehicle property. Clean-fuel vehicle property is either of the following kinds of property.
Any property installed on a motor vehicle (including installation costs) to enable it to be propelled by a clean-burning fuel.
The property is an engine (or modification of an engine) that can use a clean-burning fuel, or The property is used to store or deliver that fuel to the engine or to exhaust gases from the combustion of that fuel.
For vehicles that may be propelled by both a clean-burning fuel and any other fuel, your deduction is generally the additional cost of permitting the use of the clean-burning fuel.

9,15 & 21 Plates Dry Cell HHO Generator

Posted by Future Green Enviro On 2:21 AM

9,15 & 21 Plates Dry Cell HHO Generator
· 15mm ABS plate x 115mm x 135mm with 2mm thickness nylon for stainless steel plate.

· Stainless steel electrode plate 0.8mm x 100mm x 120mm ss316L.

 Recommended to be use with 20 Liter water tank.

 Improve Engine Performance.

Cheap source (RO Water).

Cell size : 115mm x 135mm.



9   plate total Weight : 1.4kg Gas Production : 40 L/hour @ 10amp, 12v DC


15 plate total Weight : 1.93kg Gas Production : 80 L/hour @ 15amp, 12v DC


21 plate total Weight : 2.5kg Gas Production : 150 L/hour @ 15amp, 24v DC

30 Plate Dry Cell HHO Generator With Metal Box

Posted by Future Green Enviro On 2:15 AM



30 Plate Dry Cell HHO Generator With Metal Box


· 3 liter PP casing 13” height x 7” diameter with 10mm wall thickness.

· Stainless steel electrode plate 0.8mm x 100mm x 120mm ss316L.

· PP casing can stand pressure up to 90 psi and temperature up to 80 degree C.

· Use only distilled water or RO ( Reverse Osmosis) water.

· 15mm ABS plate x 115mm x 135mm with 2mm thickness nylon for stainless steel plate separator.

· Gas production approximate 90L/Hour at 7amp with 24v Dc.

· Temperatures 34 degree C after 8 hours running without PWM.

· One water filter with check value.

· One bubbler for safety.

· One PCV valve with 1/4 stainless steel ball valve and 1/4 tube fitting.

· Fuse 15 amp with fuse holder and crimp terminals.

· Relay 24v 30amp.

.1 pcs 30amp meter.

· 1 pcs 1/4" tube equal tee.

· 6 meter red wire and 2 meter black wire.

· 6 meter 1/4 tubing and 1/4 equal tee.

· 3 meter 6mm fuel hose.
· For 10000 to 15000 cc. 

· Electrolyte: KoAH (provided) 100 gram.

· Total weight:19.2kg without the 3 litter KoAH water.

· Export Packaging will be different like what shown below:
Export Packaging

15 Plate Dry Cell HHO Generator With Metal Box

Posted by Future Green Enviro On 2:02 AM

15 Plate Dry Cell HHO Generator With Metal Box
· 3 liter PP casing 13” height x 7” diameter with 10mm wall thickness.

· Stainless steel electrode plate 0.8mm x 100mm x 120mm ss316L.

· 15mm ABS plate x 115mm x 135mm with 2mm thickness nylon for stainless steel plate  separator.

· PP casing can stand pressure up to 90 psi and temperature up to 100 degree C.

· Use only distilled water or RO ( Reverse Osmosis) water.

· Gas production approximate 60L/hour at 10 amp with 12v DC.

· Temperature 40 degree C after 8 hours running without PWM.

· One water filter with check value.

· One bubbler for safety.

· One PCV valve with 1/4 stainless steel ball valve and 1/4 tube fitting.

· Fuse 15amp with fuse holder and crimp terminals.

· Relay 12v 30amp.

. 1pcs 30amp meter.

· 6 meter red wire and 2 meter black wire.

· 6 meter 1/4 tubing and one 1/4 equal tee.

. Metal box 200mm x 300mm x 530mm.

· Electrolyte: KoAH (provided) 100 gram.

· Total weight: 17.7kg without 3 litter KoAH water.


9 Plate Dry Cell HHO Generator With Metal Box.

Posted by Future Green Enviro On 1:56 AM


9  Plate Dry Cell HHO Generator With Metal Box
· 3 liter PP casing 13” height x 7” diameter with 10mm wall thickness.

· Stainless steel electrode plate 0.8mm x 100mm x 120mm ss316L.

· 15mm ABS plate x 115mm x 135mm with 2mm thickness nylon for stainless steel plate       separator.

· PP casing can stand pressure up to 90 psi and temperature up to 80 degree C.

· Use only distilled water or RO ( Reverse Osmosis) water.

· Gas production approximate 40L/hour at 10 amp with 12v Dc.

· Temperature 38 degree C after 8 hours running without PWM.

· One water filter with check value.

· One bubbler for safety.

· One PCV valve with 1/4 stainless steel ball valve and 1/4 tube fitting.

· Fuse 15amp with fuse holder and crimp terminals.

· Relay 12v 30amp.

. 1pcs 30amp meter.

· 6 meter red wire and 2 meter black wire.

· 6 meter 1/4 tubing and one 1/4 equal tee.

. Metal box 200mm x 300mm x 530mm.

· Electrolyte: KoAH (provided) 100 gram.

· Total weight: 17kg without 3 litter KoAH water.


15Plate Dry Cell HHO Generator with 3 Liter PP casing

Posted by Future Green Enviro On 1:50 AM

 15Plate Dry Cell HHO Generator with 3 Liter PP casing
· 3 liter PP casing 13” height x 7” diameter with 10mm wall thickness.

· Stainless steel electrode plate 0.8mm x 100mm x 120mm ss316L.

· PP casing can stand pressure up to 90 psi and temperature up to 80 degree C.

· Use only distilled water or RO ( Reverse Osmosis) water.

· 15mm ABS plate x 115mM x 135mm with 2mm thickness nylon for stainless steel plate separator.

· Gas production approximate 60L/Hour at 10amp with 12v Dc.

· Temperatures 40 degree C after 8 hours running without PWM.

· One water filter with check value.

· One bubbler for safety.

· One PCV valve with 1/4 stainless steel ball valve and 1/4 tube fitting.

· Fuse 15amp with fuse holder and crimp terminals.

· Relay 12v 30amp.

· 6 meter red wire and 2 meter black wire.

· 6 meter 1/4 tubing and one 1/4 equal tee.

· 2 meter 3/8 tubing.

· Electrolyte: KoAH (provided) 100 gram.

· Total weight 6kg without 3 litter KoAH water.



9 Plate Dry Cell HHO generator with 3 Liter PP casing.

Posted by Future Green Enviro On 1:39 AM

9 Plate Dry Cell HHO generator with 3 Liter PP casing.
· 3 liter PP casing 13” height x 7” diameter with 10mm wall thickness.

· Stainless steel electrode plate 0.8mm x 100mm x 120mm ss316L.

· PP casing can stand pressure up to 90 psi and temperature up to 80 degree C.

· Use only distilled water or RO ( Reverse Osmosis) water.

· 15mm ABS plate x 115mm x 135mm with 2mm thickness nylon for stainless steel plate separator.

· Gas production approximate 40L/hour at 10amp with 12v Dc.

· Temperature 38 degree after 8 hours running without PWM.

· One water filter with check value.

· One bubbler for safety.

· One PCV valve with 1/4 stainless steel ball valve and 1/4 tube fitting.

· Fuse 15amp with fuse holder and crimp terminals.

· Relay 12v 30amp.

· 6 meter red wire and 2 meter black wire.

· 6 meter 1/4 tubing and one 1/4 equal tee.

· 2 meter 3/8 tubing.

· Electrolyte: KoAH (provided) 100 gram.

· Total weight: 5.5kg without 3 litter KoAH water.

Read More

Wet cell HHO Generator With Metal Box

Posted by Future Green Enviro On 1:10 AM


 
9  Plate wet Cell HHO Generator with metal box
· 3 liter PP casing 13” height x 7” diameter with 10mm wall thickness.

· Stainless steel electrode plate 0.8mm x 100mm x 120mm ss316L.

· PP casing can stand pressure up to 90 psi and temperature up to 80 degree C.

· Use only distilled water or RO ( Reverse Osmosis) water.

· Gas production approximate 35L/hour at 10 amp with 12v Dc.

· Temperature 40 degree C after 8 hours running without PWM.

· One water filter with check value.

· One bubbler for safety.

· One PCV valve with 1/4 stainless steel ball valve and 1/4 tube fitting.

· Fuse 15amp with fuse holder and crimp terminals.

· Relay 12v 30amp.

. 1pcs 30amp meter.

· 6 meter red wire and 2 meter black wire.

· 6 meter 1/4 tubing and one 1/4 equal tee.

. Metal box 200mm x 300mm x 400mm.

· Electrolyte: KoAH (provided) 100 gram.

· Total weight: 12kg without 3 litter KoAH water.

Read More

3 Liter Wet Cell HHO Generator with PP Water Tank

Posted by Future Green Enviro On 12:58 AM

9 Plate Wet Cell HHO Generator With PP Casing
· 3 liter PP casing 13” height x 7” diameter with 10mm wall thickness.

· Stainless steel electrode plate 0.8mm x 100mm x 120mm ss316L.

· PP casing can stand pressure up to 90 psi and temperature up to 80 degree C.

· Use only distilled water or RO ( Reverse Osmosis) water.

· Gas production approximate 35L/hour at 10 amp with 12v Dc.

· Temperature 40 degree C after 8 hours running without PWM.

· One water filter with check value.

· One bubbler for safety.

· One PCV valve with 1/4 stainless steel ball valve and 1/4 tube fitting.

· Fuse 15amp with fuse holder and crimp terminals.

· Relay 12v 30amp.

· 6 meter red wire and 2 meter black wire.

· 6 meter 1/4 tubing and one 1/4 equal tee.

· Electrolyte: KoAH (provided) 100 gram.

· Total weight: 4.9kg without 3 litter KoAH water.

Read More

1.5 L Wet Cell HHO Hydrogen Generator

Posted by Future Green Enviro On 12:49 AM


· Poly carbonate casing 10 inch height x  5 inch diameter with 6mm material thickness.

· Stainless steel electrode plate 1mm x 40mm x 80mm SS316L.

· Use only distilled water or RO (reserve osmosis) water.

· Gas production approximate 14L/hour at 10 amp with 12v Dc.

· Temperature 40 degree C after 8 hours running without PWM.

· One water filter with check valve.

· One bubbler for safety.

· One PCV valve with 1/4 stainless steel ball valve and 1/4 tube fitting.

· Fuse 15amp with fuse holder and crimp terminals.

· Relay 12v 30amp.

· 6 meter red wire and 2 meter black wire.

· 6 meter 1/4 tubing and 1/4 equal tee.

· Electrolyte: KoAH (provided) 100 gram.

 .Up to 1300cc engine.

· Total weight: 2.9kg without the 3 litter KoAH water.

Subscribe to: Posts (Atom)

    Blog Archive

    Leave your message

    Subscribe via email

    Enter your email address:

    Delivered by FeedBurner

    Affliate

    Advertisment

    Who is coming..

    Thanks For Visiting